View single post by dan3192
 Posted: Sat Jul 14th, 2018 03:20 am
PMQuoteReplyFull Topic
dan3192

 

Joined: Thu Oct 14th, 2010
Location: Connecticut USA
Posts: 228
Status: 
Offline
Finally spending more time putting together a test track for on board charging. The transmitter (Tx) boards are hard to come by, so have decided to use them off the track assembly and connect the output leads to individual coils mounted in the track bed as needed.

A 15mm round coil is too big; will try a 12mm x 22mm coil instead. Also, the charger receiver (Rx) board gets pretty close to the drive shaft between the trucks, so will need to consider mounting it inside the shell. Photos soon.  

Dan

Last edited on Sat Jul 14th, 2018 07:01 am by dan3192

Close Window