View single post by dan3192
 Posted: Sun Oct 14th, 2018 03:04 am
PMQuoteReplyFull Topic
dan3192

 

Joined: Thu Oct 14th, 2010
Location: Connecticut USA
Posts: 228
Status: 
Offline
The coil is about 3mm below the top of the rail. I estimate the best I'll be able to do is about 2mm from the top of the rails to a receiver coil under an engine or car. This gives approx. a 5mm gap between coils, so a lot of testing ahead to see how good a magnetic coupling can be made.

Disassembly and rebuilding of a couple of engines has started plus one or two new BPRC engines will be created fitted with charging coils and related electronics. The transmitter side electronics also has to be assembled and wired.

BTW, the white dot signifies a 3W transmitter and its location.


Dan

Last edited on Sun Oct 14th, 2018 03:04 am by dan3192

Close Window