View single post by Tom Harbin
 Posted: Mon Dec 2nd, 2019 09:07 pm
PMQuoteReplyFull Topic
Tom Harbin


Joined: Sat Sep 1st, 2018
Location: Arizona USA
Posts: 305
Eric T wrote:
To make sure I have the concept correct,
you want the building's platform to be the same height as the plastic one across the rails from it?

If so, I would drill holes in the foam to lower the building,
since they can be filled if drilled too far.

Or if you want to change the profile of the diagonals, remove the legs and diagonals to trim their tops,
then re-attach them to the building.


You have the concept correct.

Let me add a wrinkle.

Here is the base. The supports are glued to a piece of 1/64" ply.

And here is the structure on the supports.

The roof, the building and the supports/platform are three separate pieces.


Close Window