View single post by W C Greene
 Posted: Sun Jan 3rd, 2010 05:57 pm
PMQuoteReplyFull Topic
W C Greene



Joined: Fri May 4th, 2007
Location: Royse City, Texas USA
Posts: 8285
Status: 
Offline
Albert-I am not familiar with the receiver you are using. Black wires (usually) mean negative and red (ditto) mean positive. The input from battery to board is critical, polarities must be observed. The wires to the motor are not critical. If the loco doesn't run in the direction you believe it should, just reverse the motor wires. I am confused about the 2 boards shown and the three wire connection. On the boards I have, there are just 2 in, 2 out, and an antenna. Do you have some sort of schematic from the board that can be followed? Things look OK to me but someone else needs to give you the "green light" on the hookup.  Maybe a photo of the receiver/esc would help. Sorry to be so indefinate, but again, I am not familiar with this board and don't want to get you into "hot water"...    Woodie



____________________
It doesn't matter if you win or lose, its' how you rig the game.
Close Window