View single post by Stanton
 Posted: Tue Mar 9th, 2010 04:54 am
PMQuoteReplyFull Topic
Stanton

 

Joined: Sun Mar 7th, 2010
Location: Washington USA
Posts: 112
Status: 
Offline
This is the converter I build myself, which is more or less a reference design from the IC manufacturer's web site. It converts an input between 2.5 and 5 volts to a regulated 12 V output. It can provide 400 mA output current, maybe more; I haven't required this kind of current so I did not test for max capability. I designed the circuit board for minimum space. It measures 1 inch by 1 inch using a 2-sided PCB, which is 3/8ths of an inch thick when components are mounted both sides.
 



____________________
Neil Stanton
Close Window