View single post by Herb Kephart
 Posted: Fri Nov 15th, 2013 02:55 pm
PMQuoteReplyFull Topic
Herb Kephart

Joined: Thu Jul 19th, 2007
Location: Glen Mills, Pennsylvania USA
Posts: 5980
Looks like you are right. I convinced myself that the field edge of the iron was a separation mark in the wood. In that case, the curved wood must have been sawed. Can't picture a piece of wood that large being bent ( and staying bent) under the conditions certain when the pix was taken.

Thanks for the info, and the correction.


Fix it again, Mr Gates--it still works!"
Close Window