View single post by oztrainz
 Posted: Sun Apr 23rd, 2017 02:06 am
PMQuoteReplyFull Topic

Joined: Wed Apr 10th, 2013
Location: Unanderra, Australia
Posts: 851
Hi all

The smaller Servo-Link chain is acetyl and the larger Tamiya chain is Delrin or similar.
Both can be glued but there as some provisos...
So far the best results have been obtained with 2 part super-glues.
These have a primer and the glue.


The bond is brittle and any sharp sideways impact will shear the bond.
In a straight pull situation the bond appears to be OK. 
The results obtained with solvent type glues for styrene were disappointing.
The 2 contact adhesives we tried were unsuccessful. 

BTW - if you try to glue anything to chains like these,
ensure that you de-point your sprockets so that you don't push off the bit that you have glued to the chain.
We learned this one the hard way.

John Garaty
Unanderra in oz
Close Window