View single post by Tony M
 Posted: Sun Jul 30th, 2017 03:22 am
PMQuoteReplyFull Topic
Tony M



Joined: Thu Mar 13th, 2014
Location: Ipswich, Queensland, Australia
Posts: 487
Status: 
Offline
Started planning front module number six car port end point mock-up plan worked out so well I nailled nails where the diamond cross over is to go, other points ans track for when I paint the module after screwing the sides and beams in place wont need any legs.

The approach module I drilled all the holes for the feeder wires pushed feeder through so when the module is on its side I know what colour wire to solder the feeder wires to the bus wires, will take a fewdays to finish the bus wiring. on the module. The last station module needs to have baus wiring as well, next job.

Had a big update in win 10 last week, lost spell check, Power DVD had to reload it and find a missing file
Tony from down under

 

Attachment: 002 a.jpg (Downloaded 13 times)

Close Window