View single post by Bob R
 Posted: Sun Jan 21st, 2018 01:55 am
PMQuoteReplyFull Topic
Bob R

Joined: Thu Nov 20th, 2014
Location: Papillion, Nebraska USA
Posts: 387
I love stub switches and personally find them quite easy to set up.

Under the throwbar portion of the turnout I embed a piece of 1/8th ply into the base unless you have a ply subbase already.
To limit the throw I simply drill a small hole and insert a piece of wire at each end of the throwbar carefully aligning the rails.
You can see one in the picture.

The other is under the Caboose Hobbies ground throw.
I use the sprung ground throws.
To keep the rails level I drill and place a piece of wire "squared U shape" over the throwbar.

Close Window