Freerails Home 

Freerails IS ACCEPTING new Members ... To join Freerails ... See how to Register as a Member in the 'Joining Freerails' Forum

 Moderated by: .  
AuthorPost
markh
Registered
 

Joined: Fri Aug 2nd, 2013
Location:  
Posts: 3
Status: 
Offline
I have a digitrax zephyr for my dcc and recently acquired a couple of locos that were programmed with an NCC system. Is it possible to reprogram them with my digitrax system.

Thanks

markh

Basher
Registered
 

Joined: Wed Jan 13th, 2010
Location: Homewood, Illinois USA
Posts: 155
Status: 
Offline
As far as I know, it does not matter which system programs the decoder. I use a Prodigy advanced system and not had any problems programming any decoder so far.
Ron D.

markh
Registered
 

Joined: Fri Aug 2nd, 2013
Location:  
Posts: 3
Status: 
Offline
thanks for the info, but does it hold true that even if they have already been programmed with a different system, they can be "reprogrammed" again.

markh

NathanO
Registered
 

Joined: Tue Jan 24th, 2012
Location: Spring Branch [north Of San Antonio], Texas USA
Posts: 288
Status: 
Offline
Yes they can be programed on any DCC system that follows the DCC Standards and RP's. NCE and Digitrax do. Use the Program track. If they are 'Sound' decoders they may need a Program Buster.

Nathan


UltraBB 1.172 Copyright © 2007-2016 Data 1 Systems